This is another tip in the category of “what I wish I’d known” back when I bought my original scuba equipment. Your average dive magazine and dive shop are filled with ads for fancy jacket BCs that have all sorts of bells and whistles – sometimes literally! Yet every technical diver I know including myself uses a different system called a Backplate & Wing (or BP&W) that is both stronger and cheaper and easier to use. Why? Keep reading.

Jacket BCs

Jacket-style BCs are what you see most in recreational scuba diving magazines. A jacket BC is a nylon fabric vest attached to a plastic backpiece. The buoyancy function of the jacket comes from inflation cells usually located under the arms and up the back. You can attach a single tank to the back via an integrated strap. Jacket-style BCs are common items in your local scuba store and usually command an entire rack of hangers to themselves. Jacket-style BCs are what you would rent at a resort or in a PADI diving class.

What Jacket BCs do well: quick easy sizing

Jacket BCs come in sizes like S, M, and L. These three sizes will cover 99.9% of the human population and are recognizable by anyone that’s ever worn a t-shirt. Cinch the velcro cummerbun as tight as you can and presto! You’ve got a BC that pretty much fits with less than 30 seconds of hassle. This makes jacket BCs perfect for use in rental shops and resorts where stocking a large variety of sizes would be too expensive.

However, if you are buying your own BC you don’t care about needing to cover a large variety of sizes. All you care about is your size. You are not trying to open a rental shop. The ideal BC is one that fits you perfectly.

Why is fit so important? Jacket BCs are like an oversize set of pants you hold up with a belt: sure they cover your ass but you’re swimming (in this case literally) around inside of them. And in this case, you use them to attach all sorts of heavy equipment to your body. When under water, you want your tank and weights to be snug to your body so that they are not sliding around every time you turn or look around. A jacket BC cannot do this well.

What Jacket BCs do well: heads-up flotation on the surface

A jacket BC puts the inflation cells under your arms. This can be useful because you can super-inflate the cells on the surface and they will hold you in an easy vertical position with your face way out of the water. This is perfect for beginner divers where being under water is the “scary” zone and the surface is the “safe” zone. If they are not comfortable with a dive or if they need to discuss something with their instructor they can hang out on the surface in an inflated armchair.

Sounds good right? Forget it. The more diving you do, the more comfortable you become with being under water. The surface zone has breaking waves, boats with ladders that will whack you on the head, low-PO2 ambient air — all sorts of drawbacks! Who wants to hang out on the surface?

Plus, inflation cells under your arms get in your way when inflated. As your diving skill increases you will likely be taking more things underwater with you: cameras, lobster bags, extra tanks, scooters, or even an ironing board. Your chest and arm areas become your “work zone” for attaching stuff. You need to keep this area clean and not puffed-up with a vest.

Furthermore, jacket inflation widens your profile in the water. You want to be as streamlined as possible underwater so that you expend less effort (and consume less gas) when swimming and are less susceptible to the pull of current. The under-arm inflation cells on a jacket BC will scoop water when swimming and cause drag.

So if jacket BCs are so bad, what’s better?

Backplate & Wing

A backplate & wing (or BP&W) is a flat rectangular metal plate that you attach to your back using a nylon webbing strap. Buoyancy comes from a doughnut-shaped cell (the “wing”) that goes on your back between the plate and your tank. The whole thing resembles a parachute harness. If your local scuba store doesn’t carry plates or wings you can easily order them online.

What BP&W does well: fit

The harness on a backplate is designed to be tight. You should be able to stick a couple of fingers between your suit and the harness straps, but that’s it.

Under water this means you and your scuba rig melded together as one piece. If you tilt downwards to look under a coral head, your rig stays tightly in place and doesn’t flop suddenly forwards and whack you on your head (done that!). If you tilt to the side, the rig stays fixed in the middle of your back instead of sliding off like a deckchair on the Titanic. A nice tight rig means you stop thinking about even having a rig attached so you can start focusing on the rest of your diving.

What BP&W does well: simplicity

A metal plate to hold things, a nylon strap to attach it to your back, and one inflation cell — what could be simpler? The plate and strap are near-indestructible but if you need to fix something you can do it with parts from a hardware store. The entire setup is open and obvious.

Under water a simple setup is crucial because you need to perform actions quickly and get them right the first time. You can’t see your own body to guide your hands because the mask interferes with your peripheral vision. If you’re wearing cold-water gloves or a wet/drysuit you also don’t have your sense of feel and the dexterity required to grope your way though a complex attachment or piece of equipment. A plate & harness excels here because it’s as simple as possible, and no simpler.

What BP&W does well: strength

Extreme strength may not seem necessary for the beginner or intermediate diver. You’re not attaching two hundred pounds of steel doubles tanks and lead weight. However, it’s good to know that your standard harness and plate can easily do that if you need it. The plate is steel or aluminum. The harness is 2-inch wide nylon, sometimes stiffened with resin. Buckles and attachment points are stainless steel.

You may not need all this strength, but it’s there if you need it. Your standard jacket BC with velcro attachments and thin nylon fabric will tear or drop that underwater camera when you least want it…like on the deck of the boat when you’re getting out in heavy seas.

Technical divers will also site an additional list of reasons why a BP&W is better than a jacket BC, for example that it provides standardization of equipment so that buddies on a diving team are guaranteed to know their partner’s rig as well as they know their own.

What About Cost?

One of the things I like about diving is that good technical equipment often costs less than the highly-advertised gear you see in scuba magazines. Let’s see if this is true for backplates and jacket BCs too.

Jacket BC Costs

These prices are from LeisurePro. I tried to pick the model from each manufacturer that best represented a high-end recreational BC, the kind of thing you would want to buy for yourself (versus rent at a resort).

BP&W Costs

You can buy a backplate, harness, and wing separately if you wish. You can also often find them sold together as a package deal. If you buy separately, you should get a tank strap to attach the tank to your plate.

Total price of the average piece prices: $471!

However, you can also find some package deals, like these:

• ScubaToys BP&W package: $319
• Golem Gear BP&W package: $390

So, not only is a BP&W better fitting / stronger / easier to use than a jacket BC, it’s also equal price (or cheaper!). What are you waiting for?

Convinced yet?

You still have a few choices to make if you decide on a BP&W instead of a jacket BC. Some recommendations:

• Harness: “Hogarthian” or “Deluxe”? A Hogarthian (named for the diving minimalist William Hogarth Main) harness is the basic, simple harness. “Deluxe” harnesses take a Hogarthian one and then add plastic buckles and extra straps. In this case, simplicity is better. Go with a Hogarthian. If you really feel the need to pimp out your rig, you can get nice soft Polypro webbing for your harness (I like it myself).
• Plate: aluminum or steel? This is a weighting question. A steel plate is approximately five pounds more negatively buoyant than an aluminum plate. If you need a lot of weight to dive (e.g. for cold water and a drysuit) a steel plate will relocate the weight off your belt and into the backplate which will be much more comfortable. If you travel by plane to dive, get an aluminum plate.
• Wing: how many pounds of lift? For typical single-tank open-circuit diving a 35lb or 40lb wing is quite sufficient. You don’t want a ginormous 60lb wing because the excessive size will cause drag.

Note: I’m not a scuba instructor and I’ve never played one on TV. If you’re an instructor or diver with the experience to recommend something to the next generation of up-and-comers, what would you suggest they get when buying their own set of equipment?

A bit of background for those who don’t know much about the Island: Corsica is the largest french owned island (3,351 sq mi, roughly the size of Porto Rico), south of the mainland (110 miles), just north of Sardaigna and west of Italy (56 miles). As such, it is in the Mediteranean sea and enjoys temperatures in the high 60s at depth in the summer (and mid 90s on land). Corsica is very mountainous above the water and many of the large boulders found on land can be seen underwater. It has a lot of costline (620miles). One can fly to Corsica through Paris (Orly) and Marseille (MRS) as well as take an overnight ferry (with a car, which is what I did). Those are very large ferries capable of transporting 2000+ people and 700 cars.

Raised in the south of France, I had never been to Corsica and didn’t quite know what to expect (you don’t usually vacation in the Dominican Republic when you live in P.R.). I chose Corsica for this dive vacation because it was a good place to take my parents (for my dad’s 90th birthday), an easy place to get to, far away from where I now live (Boston) and a beautiful island to boot. Furthermore, the presence of a rEvo instructor implied a rebreather friendly structure in Porticcio/Agosta on the west coast where we stayed (we rented a 4 bedroom villa for $2000 a week or so).

I dove with Corse Plongée, owned by Nicolas Caprili (FFSSM, PADI & IANTD instructor). Nicolas has put together a great team with Laurent, Tristan, Thomas & Guillaume. I emailed him in advance so as to make sure he had sorb, helium and O2 for me. Air France was kind enough to misplace my rEvo III for 5 days so he even rented me a rebreather until I finally got mine back.

I did four dives with Guillaume, a new instructor in the club who arrived the same day I did. Diving in a mixed team (OC, CCR) was a first for me and Guillaume was a very good buddy. We discovered a plethora of sites together. France and Corsica are on a more mellow diving schedule that I am used to and people generally only make 2 dives a day (one in the AM, one in the afternoon). I made four dives in 25-30m (80-100ft) with Guillaume, most of them with no deco (Guillaume did have some deco, diving on Air). The night before the last day, Nicolas and I prepared for a Normoxic Trimix dive, filling dil, O2 and bailouts (21/35 and EAN 40). The next day we made a really nice dive to 55m.

Some more details:

• I dove with my new Pinnacle 5mm Merino. It was ok for 60mn dives in 65F water (at 25-55m) but not warm. The suit seemed a bit stiff and maybe a tad small when I first got it but it fit perfectly and felt great.
• Corse Plongée lent me a few bailout bottles. They are steel 65 & 72 I think and as such very negatively buoyant. So buoyant in fact that with a pair, at 55m my rEvo wing couldn’t lift me off at all. I had to cut off Nicolas’ trim weight and he mine. They work well though
• I brought my own Travel Stage Bottle Rigging (one from DR and one from Deep Sea Supply which I really dislike – Tobin and I got into it once and he really doesn’t stand behind his products). It made it easy to grab any tank and rig it quickly to be a bailout bottle. They take little space and are good to have.
• While Corsica has a few wrecks around its coastline, the gulf around Ajaccio where I have is mostly tempered water reefs. They are beautiful, very tall boulders populated with much sealife. We’re talking 60m+ tall moutains of boulders, on top of each others in what sometimes seems to be precarious balance. We saw large fish (Dentie/Dentex/Brem – Merou/Grouper), lots of Chromis Chromis, lots of Scorpion Fish (ate one at dinner), tons of wrasses, nudibranch, quite a few spiny lobsters (juvenile and large specimen), octopus. Often, looking up from 20m, the water would be filled with hundreds of fish all the way to the surface. At 55m, I was delighted to see a lot of Anthias, one of my favorite specie. I even caught a glimpse of a Mola Mola/Sunfish/Mole/Poisson Lune) in the water and at the surface (√-check, it was on my list of things to see). In any case, lots of fish but I want to make sure I put an emphasis on the underwater scenery, those large boulders are fantastic, beautiful underwater structures.
• Corse Plongée has two ‘semi-rigide’ – zodiac like boats with a solid bottom. They’re easy to get into (christmas tree ladder) and out of (roll over). As a rebreather diver, they always let me splash first and come back on the boat last, very nice. Before diving you load up all the gear in a truck, walk 100 yards to the beach, bring the gear in the boat and go dive. Most dive sites are 10 minutes from the beach.
• The rEvo III mini hybrid worked really well. Doing 1-2 dives a day I flew it manually at 1.3 using the Shearwater as a parachute at 1.1. I mostly dove Air. I used stubby 3L tanks that Paul sells in Europe (3L at 200bars, I don’t know what the US equivalent is). I used a 4lbs weight for trim but 8lbs might have been better (5mm wet suit, Steel 72 bailout, steel mini rEvo III)
• I didn’t take any photos. Taking a rebreather overseas for the first time (with all technical equipment) was stressful enough, combined that those were my first relaxed dive on the rEvo that I didn’t want to bring my camera housing (though I did bring my 5D MkII and my LX3 I didn’t dive with them).

I want to thank Nicolas, Guillaume and the rest of the team for being so accommodating, helpful and making my dives great. I recommend Corsica & his organization for diving. You might not find great wrecks there but the dives are wonderful, the club is well organized and Corsica is beautiful.

Feel free to ask any questions

? Select your Open Water instructor carefully. Talk to accomplished local divers and ask them for a recommendation. Agency doesn’t matter much as long as the instructor is good. Bad habits are formed early and so are good habits.

? If you are going to go to a resort to learn scuba diving, complete the theory & pool classes with your local dive shop first and bring the paperwork to your resort diving center when you go on vacation. Do the open water dives there if you want but don’t waste time in a classroom or a pool while in some beautiful resort. If you can dive locally, by all means do your open water dives there. Local diving can be amazing.

? On that subject, it seems you can dive pretty much everywhere you live (I know, there are exceptions). There is always a mountain lake, a quarry or a local shore to dive at. Yes, local diving can be cheap, easy and rewarding. So dive locally!

? Forge a relationship with your Local Dive Shop (LDS). You might save some money buying gear online and sometimes your LDS will not carry the
items but when the difference isn’t much, support your local brick and mortar shop. They will rent you tanks, fill your own tanks, provide advice, organize outings, service your gear later – they’re important.

? Meet local divers, mingle, learn from them. They know the spots, they know the tricks, they know the etiquette.

? CyberDive a bit but not to excess. There are many great online communities where to exchange ideas, buy and sell used gear, meet local and remote divers. Don’t become a couch diver though, do get in the water.

? Don’t rush your recreational scuba training. Yes, you can get your Advanced Open Water certification (or equivalent) right after your Open Water but why would you ? Enjoy your diving, build some experience before opening up to new challenges.

? Many many dives later, after you complete the Rescue diver class (or equivalent), don’t bother with any of the ‘specialties’. Besides Dry Suit training, there isn’t really much to learn in the PADI specialties that you can’t learn by diving.

? Dive Master training can be fascinating but understand what you’re getting into.

? Going past your No Decompression Limit into decompression diving, diving with a ceiling (virtual or physical) such as wreck penetration diving, cave diving, deco diving are tech diving activities that absolutely require the proper training.

? Pick up a copy of the PADI Encyclopedia of Recreational Diving. It’s actually pretty good and contains most of the knowledge you’ll need in your recreational scuba activities.

? Prefer paddle fins to split fins. But that’s just my opinion. Buy a good mask as well. Later on buy a Buoyancy Control Device (BCD) and then a regulator.

? For BCD, don’t buy a jacket style, buy a back-inflated BC or a Backplate/Harness/Wing (BP/W) combination. The later is my preference and is likely to last you for a very long time. Find a used one, they’re just great.

? Learn the Frog Kick from the get go and forget about Flutter kick. You will not regret it.

? Focus on Buoyancy and Finning. Those are key skills.

? Do not get into the water without